Western Wave® Metal Wall Panel – 8.0
For Commerical, Industrial, and Residential Construction Projects
Experiment with different colors, finishes, and panels on your building before you decide.
What Is Western Wave® 8″ Wide Single Metal Panel?
Wave panels have a distinctive look with bold shadow effects that highlight the unique look of the panel ribs. They are perfect as an accent wall because the different textures create depth and break up the look of a large exterior wall. Wave panels can be installed horizontally or vertically over any solid substrate or open framing. There are no visible fasteners so it has a sleek and ultramodern appearance that will complement your buildings features and architecture.
Quick Links
Concealed Fastener Panel
Western Wave® Metal Rigid Wall Panel
Wave panels are a rigid wall panel that’s attached with concealed fasteners. This panel has a unique rib shape where the front of the panel rib is sloped and less steep than the back rib, shaped much like an ocean wave. Wave panels are considered less obstructive because the ribs are not symmetrical and appear smoother when compared with traditional box rib panels.
Wave panels can be mixed and matched. You can combine all three panel widths of 16″, 12″, and 8″ as they are designed to interlock with each other.
Dimensions
Rib Height: 7/8″
Panel Width: 8″ Coverage
Panel Length: 6′ to 45′ max
Product Data
Material Type:
Wave – 8.0
Gauge: 24
Substrate: AZ50 Minimum (AKA Galvalume®/Zincalume®)
Finishes: PVDF Resin Based
Fasteners: Concealed Fasteners
Installation: Horizontal or Vertical Installation
Product Documents
Western Wave® Metal Colors
There are eleven color charts to choose from:
- Standard (PVDF) Colors: PVDF is the highest quality metal coating. The colors will stay bright and vibrant much longer.
- SMP Paint Finish:SMP coating provides quality paint performance for metal panels at a lower cost.
- Specialty Paint Print: Designed to replicate a naturally occurring patina. The metal is painted repeatedly giving the finish depth and uniqueness.
- Additional Finishes: These are finishes that are NOT painted which include: Galvanized, Galvalume®, Aluminum, Bonderized, Copper, Corten®, More.
Product Documents
Standard Colors
Our standard Polyvinylidene Difluoride (PVDF), has a chemical composition that gives it high mechanical strength and superior abrasion resistance. The tough engineering thermoplastic has increased durability, excellent chemical resistance to halogen and acids that can cause degradation. The surface of PVDF panels is able to handle high temperatures and extensive ultraviolet ray exposure while resisting fading and chalking for longer than SMP painted panels.
By using aluminum roofing and siding panels in PVDF paint, you will have vibrant and attractive painted aluminum panels for longer than any other paint system.
SMP Paint Finish
We also offer special ordered colors. These metal roofing colors are not in stock. They are supplied on a job by job basis. If you see a color that you like, there are some things that you should be aware of.
- 500 Square Foot Minimum
- Longer Lead Times
- Cost An Additional 10% to 25% When Compared To Standard Colors
We recommend that you start by looking at all of our standard metal roofing colors. You can find the links below on this page. They cost less and can be manufactured quicker. If you need something different, these colors below might be your solution to finding the perfect metal roofing color for your house.
Specialty Paint Prints
500 Sq. Ft. Minimum
We also offer special ordered colors. These metal roofing colors are not in stock. They are supplied on a job by job basis. If you see a color that you like, there are some things that you should be aware of.
- 500 Square Foot Minimum
- Longer Lead Times
- Cost An Additional 10% to 25% When Compared To Standard Colors
We recommend that you start by looking at all of our standard metal roofing colors. You can find the links below on this page. They cost less and can be manufactured quicker. If you need something different, these colors below might be your solution to finding the perfect metal roofing color for your house.
Click on a color category below to see all of the colors available:
Additional Finishes
We also offer special ordered colors. These metal roofing colors are not in stock. They are supplied on a job by job basis. If you see a color that you like, there are some things that you should be aware of.
- 500 Square Foot Minimum
- Longer Lead Times
- Cost An Additional 10% to 25% When Compared To Standard Colors
We recommend that you start by looking at all of our standard metal roofing colors. You can find the links below on this page. They cost less and can be manufactured quicker. If you need something different, these colors below might be your solution to finding the perfect metal roofing color for your house.
About Metal Roofing
Frequently Asked Questions
How can I use Western Wave® Metal Roofing Panels?
Western Wave® can be used in a variety of applications including roofing and siding material for commercial, industrial, agricultural, and residential projects.
- Exterior applications: Total wall area, or conjunction with other architectural elements of design, metal siding, decorative fencing, restaurants, movie sets and much more.
- Interior applications: Focal point or backdrops such as backsplash in a bath or kitchen, textured ceiling, and a wall treatment.
What are the features and benefits of metal roofing?
- Corrosion and Rust Resistant – Our metal roofing and siding panels and sheet steel products are coated with Galvalume®/Zincalume® – an aluminum-zinc alloy coating with extraordinary outdoor corrosion resistance.
- Durable – Metal Roofing coated with Galvalume®/Zincalume® will have an exceptionally long life expectancy.
- Rot Resistant – Since metal is an inorganic material, unlike wood, it does not rot – making it the best choice in roofing material by builders and architects alike.
- Pest and Termite Resistant – Bugs, pests, and termites cannot penetrate through metal materials making a corrugated metal roofing system your best defense against unwanted creatures.
- Fire Resistant – Metal roofs are noncombustible and have a Class A fire rating. Class C rating when applied over a combustible material such as wood shingles.
- Wind Resistant – Metal roofing can withstand powerful wind gusts.
- Lightweight – Lightens the load in installation and reduces the load bearing weight on support walls and beams.
- Stylish – Available in various colors and can be ordered in a variety of premium specialty finishes.
- Energy Efficient – Metal roofs with a “Cool” paint finish reflect solar radiant heat, which can help reduce cooling costs.
- Eco-Friendly – Metal roofing is made from recycled content. Corrugated roofing panels are also recyclable at the end of their life as a roof. In contrast, most shingle tear-off waste ends up as part of the building-related waste stream – up to 20 billion pounds per year.
What is the difference between Exposed Fastener Panels vs. Concealed Fastener Panels?
- Exposed fastener metal roof and wall panels are made with fasteners that can pierce through the panel’s face and attach to the structure. The panel seam will not cover the fastening head, making it visible. It is the most affordable type of panels and it is easier to install compared to concealed fastener panels.
- Concealed fastener metal roof and wall panels are fastened to the structure in a way that hides the screws. Instead, clips and/or screws are secured behind the panel’s face for concealed fastening panels during installation. After installation, concealed fasteners blend with the wall’s appearance. For protection from the weather, they are concealed behind interlocking panel joints, giving the panels a smoother appearance than roofing panels with exposed fasteners.
What should I expect when I order from Metal Roofing California?
Excellent customer service is important to us. When you place your order with Western Metal Deck you can expect the following:
- Knowledgeable Sales Associates – Helpful and friendly sales associates that will answer all of your questions.
- Made to Order Panels – We cut your metal roofing and metal siding panels to the exact lengths needed.
- Fast Turnaround – Typical two week maximum lead times. However, if you need it quicker, we normally can accommodate just about any completion schedule.
- Shipping Convenience – We have route trucks that service anywhere in the USA and Canada.
- Affordable Shipping – Immediate and inexpensive shipping.
Learning Center
Metal Roofing Pros And Cons: Is A Metal Roof Right For You?January 31, 2023 - 9:01 pm
